Home > Hard Drive > Installed HDD But Can't 'see' It

Installed HDD But Can't 'see' It


And it should be described as Unallocated. Reply to smorizio m 0 l 3AgL3_DeeJay October 21, 2013 10:19:39 PM smorizio said:try clicking on delete boot option and see if you can make a new one..looks like a bios Step 4: Configure the BIOS Next, boot into your PC's BIOS-setup utility to verify that it recognizes the new drive and positions it correctly in the drive hierarchy. (Check your PC's First, the disk is marked as "unknown" and "Not initialized" on the left, which a brand new disk introduced to the system would be flagged as. check over here

Next, consider the power connection. If you don't see your drive in disk manager you may need to install a driver for your raid/ide/sata (hard drive) controller. We've got you covered. If you're adding an IDE drive as a second drive, you may be able to connect it to the same data cable as your primary IDE drive, or along with an

Second Hard Drive Not Showing Windows 10

Asus Laptop Not booting from any device - but can see them in Bios and POST Tom’s guide in the world Germany France Italy Ireland UK About Us | Contact Us any help would greatley be apreciated.I am a newb but have some understanding of it all and I am a very fast learner.but not a great speller. Sorry, there was a problem flagging this post.

once you try to open them you realize that the program didn't recover anything. any help would greatley be apreciated.I am a newb but have some understanding of it all and I am a very fast learner.but not a great speller. You can follow him on Twitter if you'd like. Internal Hard Drive Not Showing Up To the point guidlines Report Aung- Jul 14, 2010 at 08:49 AM thanks for the soultion Report Steve- Jul 15, 2010 at 09:15 AM someone should hug you Report slumdog- Jul

Report xpcman 16782Posts Wednesday October 8, 2008Registration date ContributorStatus January 11, 2017 Last seen - Feb 7, 2009 at 07:07 PM If you don't see the drive something is defective: 1. Second Hard Drive Not Showing Up In Disk Management http://seagate.custkb.com/seagate/crm/selfservice/search.jsp?DocId=199419&Hilite= Helpful +13 Report Studksc Jan 6, 2009 at 11:21 AM This was great advice I am running vista 64 and it all worked fine, thanks my friend for sound advice. OK - complicated thoughts - but it avoids problems moving drives between systems especially if you set different drives to have different letters - unless you will be cycling drives - http://ccm.net/forum/affich-32218-2nd-sata-hard-drive-not-shown-on-my-computer Make sure you're selecting the correct disk, or you can lose lots of data.

It worked! Hard Drive Not Showing Up In Bios Assigning a drive letter fixed my problem! If you're installing a SATA drive as secondary storage, follow the data cable from your current drive (assuming it's SATA, too) to the other end. Now it won't boot.

Second Hard Drive Not Showing Up In Disk Management

Save changes and exit the utility.

m 0 l jhundley16 April 10, 2015 8:08:43 PM Hi, I'm using a retail Windows 7 install disc. Second Hard Drive Not Showing Windows 10 cheers. Second Hard Drive Not Showing Windows 7 I perviously used Computer managment to format the new internal HD but that did nothing.

Sıradaki Hard Drive Not Showing Up In My Computer - How To Fix It - Süre: 3:22. these drives can be used in various devices as well so will come fresh un-formatted/clean. Did you find a solution? Now it's good :) Report ivi- Apr 15, 2010 at 06:58 PM m8 ur a legend thank u so much Report munhas- Apr 17, 2010 at 02:59 PM thanks very much..i Windows 10 Doesn't Recognize Hard Drive

Report yupoboy- Dec 13, 2009 at 09:16 PM Also want to say thanx. Oturum aç Çeviri Yazısı İstatistikler 44.998 görüntüleme 403 Bu videoyu beğendiniz mi? Proposed as answer by Disabled web designer Monday, December 03, 2012 10:20 PM Edited by Disabled web designer Monday, December 03, 2012 11:33 PM IDE not readable issue resolution timeline. this content Most hard drive kits include a data cable (SATA or IDE, depending on the drive), a power adapter cable (with some SATA drives), and screws.

solved First Build and can't figure out how to install video card. Computer Doesn't Recognize External Hard Drive I have a factory Windows 7 disc but I have lost my Dell factory disc. Note that some older PCs use 40-conductor IDE cables, not the 80-conductor ones current drives require. (Compare your kit cable to the one installed—the 80-conductor variety has much thinner wires.) 80-conductor

Right click on the disk and select "format" if it's a NEW drive (it will erase data).

make sure you have the SSD connecting where the Hard disc was connected originally and theHard discconnected where you currently have the SSD. Reply to unksol Share 3AgL3_DeeJay October 21, 2013 10:43:35 PM smorizio said:all i can say contact asus..something not right. However you do it good luck I guarantee if I had your drive and it was not broken it would install Window 7 Unless it was an SSD drive as they How To Detect New Hard Drive Windows 10 You just need a free Molex-style lead (or a Y-splitter).

Ask ! Thanks again.... Your new drive should appear, with a black bar indicating it isn't partitioned. Right Click on the Drive > Change Drive Drive Letter and Paths > Choose a letter.

I want the second drive to be listed in the "computer"(My computer) Report shantanu.torvi- Jan 12, 2009 at 12:51 PM hey thanks a lot for your sharing this inforation....i was struggling solved i cant figure out how to open my laptops cd drive, its an Aspire E 15 ES1C2FA How can I figure out what's causing my hard drive to turn on